Product Description
What this product is and who it is for
The Nellcor™ PM10N is a handheld pulse oximeter intended for spot‑checks and continuous non‑invasive SpO2 and pulse‑rate monitoring in hospitals, transport, sleep labs and home‑care settings. The PM10N‑PED kit bundles the monitor with pediatric sensor accessories for clinics and homecare use where pediatric monitoring is required.
Specifications
- Model: PM10N portable SpO2 patient monitoring system (PM10N‑PED = pediatric kit variant).
- Display: vivid 3‑inch colour LCD screen.
- Power: uses four AA batteries (manufacturer recommends Lithium AA); battery indicator and low/critical battery alarms included. Typical battery life is shown as approximately 20 hours under typical conditions.
- Data: stores up to 80 hours of trend data; supports wired data export to a PC (requires driver/tools provided by manufacturer).
- Sensor compatibility: compatible with Nellcor OxiMax™ sensors (single‑patient, reusable and specialty sensors). Optional DEC‑4 interface cable (approx. 1.2 m) available.
- Performance note: manufacturer documents describe a LoSat expanded accuracy range (60%–100% SpO2) when used with Nellcor adhesive OxiMax sensors.
What is included
- PM10N handheld monitor (PM10N‑PED kit): monitor, sensor cable and pediatric sensor accessories as specified by the kit SKU.
- PM10N‑PED kit contents (kit SKU explicitly described by vendors): reusable SPO2 pediatric multisite sensor DS‑YS (sized for >1 kg) and D‑YSPD pediatric finger clip (clip only).
- The manufacturer’s product literature and operator guides are the authority for full accessory lists and orderable options.
Condition and packaging
- The supplied photograph is a product/stock style image of the monitor and sensor; no sealed factory packaging or box is shown. If purchasing new, expect manufacturer packaging and kit contents described by the SKU; confirm with the seller before purchase.
Usage notes
- Intended for prescription use only; see the operator’s manual for complete instructions, warnings and intended‑use limitations.
- Use only Covidien/Medtronic (Nellcor)‑approved sensors, cables and accessories to ensure accuracy; manufacturer warnings advise against using third‑party sensor cables or extending cable lengths.
- For homecare use the device supports a Home‑Care mode and Sleep‑Study mode (display dimming and silencing features) as described by the manufacturer.
Limitations and warnings
- This listing does not include training, clinical advice or service; read the operator’s manual before clinical use.
- The image provided does not show serial number, box seal, or manufacturing lot — the packaging state is not verifiable from the photo.
- Do not assume sterilization; sensors and clips have their own Instructions for Use and cleaning/disinfection requirements.
If you need additional details (firmware version, serial, factory-sealed packaging photo, regulatory paperwork, or proof of calibration/service), request them from the seller before purchase.
