Product Description
- This bariatric system provides alternating pressure to optimize pressure redistribution for patients with up to Stage IV pressure ulcers in the home, long term care, or acute care setting.
- 10" deep static perimeter tubing surrounds the length of the matress preventing the patient from becoming trapped between the mattress and side rails.
- Cell-on-cell design of 8" deep air cells prevents "bottoming out" and also provides up to 24 hours of power outage protection.
- Digital pump allows for customization to individual patients' comfort and safety needs, and will auto-return to alternating pressure mode if system is left on static mode for >2 hours.
- 4-way stretch cover is low sheer, fluid resistant, vapor permeable, quilted and zippered.
- Each one of the 20, 8" deep air bladders are easily removed and replaced.
- Pillow function maintains the 3 air cells at the head of the bed in static mode for patient comfort.
- 3 diagnostic alarms tell you whether a problem is with the mattress or the pump for more efficient servicing.
- 450 lb weight capacity.
- CPR valve allows for rapid deflation.
- The Med Aire Bariatric Low Air Loss Mattress Replacement System by Drive Medical is perfect for people looking for alternating pressure for Bariatric people. The alternating pressure system is optimized for pressure redistribution for people with up to Stage IV pressure ulcer, and thus was designed to prevent, treat, and manage pressure ulcers in a home, long term care, or acute care setting. The cell-on-cell design of 10" deep air cells prevents "bottoming out" which is when the patient would sink to the bottom of the mattress. The Med Aire Bariatric Low Air Loss Mattress even provides an additional 24 hours of use in the event of a power outage. The advanced digital pump allows for a custom setting which allows the individual to set the unit to his comfort and safety needs, and will even auto return to a alternating pressure mode if the system is left on static mode for more than 2 hours. The convenient cover stretches 4 ways, is low sheer, fluid resistant, vapor permeable, quilted and zippered. In the unlikely event that one of the 20 air cells malfunctions due to a puncture, they are easily removed and replaced. The unit also has a pillow function allowing 3 air cells at the head of the bed to stay in a static mode for better comfort and easier sleep. The system has 3 distinct diagnostic alarms which tell you whether the problem is with the mattress or the pump allowing for easy and effective troubleshooting. Be sure to consider the Med Aire Bariatric Low Air Loss Mattress Replacement System for effective treatment and ideal comfort.
Features
- 10" cells are constructed with Nylon/TPU that is soft, lightweight and will not stretch
- CPR valves provide fast (20 second) deflation
- Cell-on-Cell design prevents the patient from "Bottoming Out" in the event of power failure
- Ideal for use in nursing homes, hospitals and home use
- LED and Audible low pressure alarm activate when pressure falls below 10-mmHg
- Mattress has 20 air bladders
- Mattress operates in an alternating pressure mode
- Quick fill adapter standard
- The product is designed to be used in the prevention, treatment and management of Pressure Ulcers
- The zippered Nylon/TPU cover material is quilted, water resistant, vapor permeable and machine washable
- Whisper quiet pump produces 15-LPM (Liters per Minute) in air flow
Pump Power 110 VAC | 60 Hz Pump Airflow 12 LPM Pump Cycle Time 10, 15, 20, 25 Minutes Pump Type Compressor Pump Alarms Visual / Audible Mattress Dimensions 80" x (42", 48", 54", 60") x 10" Mattress Cover Material Fluid-Resistant Stretch Weight Capacity 600 lbs. - 1000 lbs. Warranty 18 Month Limited
Product Videos
Custom Field
Product ID: 14054