Drive Medical 14027P Pump for 14027

Product Description

What this is and who it is for

The Drive Med‑Aire 14027P is the control/pump unit used with the Drive 14027 alternating‑pressure, low‑air‑loss mattress system. It is intended for caregivers or facilities that need a replacement pump/control unit for an existing 14027 mattress system.

Specifications

• Manufacturer model: 14027P (pump/control unit for Drive Med‑Aire 14027 mattress).
• Power: 120 VAC, 60 Hz (manufacturer specification).
• Inner mattress pressure (adjustable range): commonly specified as 30–80 mmHg (inner mattress pressure) and a pump air volume around 8 LPM.
• Typical pump dimensions listed by suppliers: approximately 11" W × 8" H × 3.5" D; power cord length commonly listed as ~15 ft.
• Therapy modes: alternating (10 minute cycle typical) and static (static mode/therapy off).

What is included

• Pump/control unit only, as pictured.
• No mattress, no replacement air cells, and no mattress cover are included unless explicitly listed.

Condition and packaging

• Item is shown unboxed (control/pump only) in the provided photograph; no factory-sealed retail packaging is visible.
• The listing should be read as 'pump only' and sold without the mattress unless the seller states otherwise.

Usage notes

• Use only with Drive Med‑Aire 14027 mattress systems or other systems where the manufacturer states compatibility with the 14027P control unit.
• The unit provides alternating therapy (with the standard 10‑minute cycle) and a static mode that disables alternating therapy.
• The control panel has a firmness/weight dial, visual alarm indicators for LOW and NORMAL pressure, and buttons for static mode and alarm reset.

Limitations and warnings

• This listing does not include the mattress, replacement air cells, or other replacement parts unless explicitly stated.
• Warranty terms vary by seller; manufacturer limited 1‑year warranty is commonly listed on official product documentation but verify with the seller.
• If compatibility with a specific mattress serial or variant matters, verify model numbers; do not assume interchangeability with other Drive/DeVilbiss pump models.

If uncertain

• If you need a factory‑new sealed unit in original packaging, request explicit confirmation and photos from the seller before purchase.